While the old way of preparing advertising data is still supported, an alternative enhanced method to build advertising packets is now available.
It consists in defining and configuring an object of type 'BLEAdvertisingData' to build the desired packet.
When it has been configured, by setting the appropriate parameters, it can be used to populate the advertising data packet or the scan response data packet.
Following this way, the user can decide in which packet each parameter should be put.
Also, it is now possible to configure an advertising packet (advertising or scan response) by passing a raw data packet.
If an advertising packet has a raw data parameter set, all its other parameters will be ignored.

Also, advertising parameters such as manufacturer data, service data or raw data should have a GLOBAL scope, because they are passed as pointers and are not copied internally.

Initial - encrypted read

With write encryptionn requirement

Write encryption & visible LTK / IRK

Fixed packet fragmentation

Android bugfix

Fix timing issue during pairing, add pairing control/status methods

Secure random & reject unknown LTK

Pairing code & IOCaps set via implementation of callbacks

Add Nano RP2040 Connect to "smoke test" examples compilation CI workflow

The file previously targeted by the embed has been lost or moved. Experience shows that this is is a common occurrence
with the files hosted by Arduino, and will be especially problematic in cases like this where the file may appear to be
superfluous to the website maintainers due to the lack of any internal references to it, so the only way to ensure the
file will continue to be available is by hosting alongside the documentation content in the repository.

I was able to recover the lost file from the Internet Archive Wayback Machine's 2023-06-18 archive of the previous URL:

https://web.archive.org/web/20230618230604/https://www.arduino.cc/en/uploads/Reference/ble-bulletin-board-model.png

The absolute URL of the file was intentionally used in the markup instead of what would normally be the best practices
of using the relative path. The reason is because the documentation content will be published at
https://reference.arduino.cc/reference/en/libraries/arduinoble/ and the publishing system doesn't have any capability
for handling asset files.

The previous target of this link is no longer available.

I found that there is no longer an authoritative web page that provides a list of standard GATT service UUIDs, equivalent to the previous target of that link:

https://web.archive.org/web/20160305021019/https://developer.bluetooth.org/gatt/services/Pages/ServicesHome.aspx

The Bluetooth Special Interest Group has since moved this information into the "Assigned Numbers" pdf, so I replaced the
broken link with a link to the download page for that document and noted its location in that document.

Fix broken links in documentation

Fix warnings

Add support for OPTA

Needs UNOR4USBBridge firmware >= 0.2.0

wip: add support for UNO R4 WiFi

Bumps [actions/checkout](https://github.com/actions/checkout) from 3 to 4.
- [Release notes](https://github.com/actions/checkout/releases)
- [Changelog](https://github.com/actions/checkout/blob/main/CHANGELOG.md)
- [Commits](actions/checkout@v3...v4)

---
updated-dependencies:
- dependency-name: actions/checkout
  dependency-type: direct:production
  update-type: version-update:semver-major
...

Signed-off-by: dependabot[bot] <[email protected]>

…dabot/github_actions/actions/checkout-4

Bump actions/checkout from 3 to 4

commit f9e5019
Merge: 2017ab4 2a070fa
Author: Frederic Pillon <[email protected]>
Date:   Mon Jul 24 15:43:42 2023 +0200

    Merge pull request stm32duino#60 from fpistm/payload_reset

    fix: TL_Evt_t payload size for reset

commit 2a070fa
Author: Frederic Pillon <[email protected]>
Date:   Mon Jul 24 11:19:27 2023 +0200

    fix: regenerate STM32Cube_FW patches

    Signed-off-by: Frederic Pillon <[email protected]>

commit 819cebd
Author: Frederic Pillon <[email protected]>
Date:   Mon Jul 24 10:55:20 2023 +0200

    fix: TL_Evt_t payload size for reset

    Within last CubeWB update TL_Evt_t payload size was reduced.
    This produce a warning -Warray-bounds due to the reset management
    which require 4 bytes.

    Signed-off-by: Frederic Pillon <[email protected]>

commit 2017ab4
Merge: eab1891 370e108
Author: Frederic Pillon <[email protected]>
Date:   Tue Jul 18 11:25:24 2023 +0200

    Merge pull request stm32duino#59 from fpistm/stm32CubeWB_1.17.0

    chore: update to STM32Cube_FW v1.17.0

commit 370e108
Author: Frederic Pillon <[email protected]>
Date:   Mon Dec 12 17:29:27 2022 +0100

    chore: add support for customize app_conf_default.h

    Signed-off-by: Frederic Pillon <[email protected]>

commit 5d07a0e
Author: Frederic Pillon <[email protected]>
Date:   Thu Jul 13 17:16:40 2023 +0200

    fix: include a timeout when waiting for the cmd_resp

    Signed-off-by: Frederic Pillon <[email protected]>

commit 542e007
Author: Frederic Pillon <[email protected]>
Date:   Thu Jul 13 17:08:05 2023 +0200

    chore: adapt STM32Cube_FW sources

    Signed-off-by: Frederic Pillon <[email protected]>

commit 61b8a3b
Author: Frederic Pillon <[email protected]>
Date:   Mon Jul 17 11:34:26 2023 +0200

    chore: update STM32Cube_FW from Cube version v1.17.0

    Signed-off-by: Frederic Pillon <[email protected]>

commit eab1891
Author: Frederic Pillon <[email protected]>
Date:   Mon Jul 17 11:30:41 2023 +0200

    fix(doc): wrong version

    Signed-off-by: Frederic Pillon <[email protected]>

commit 98e8e3f
Author: Frederic Pillon <[email protected]>
Date:   Thu Jul 13 18:28:25 2023 +0200

    fix: regenerate STM32Cube_FW patches

    Prepare update to version 1.17.0

    Signed-off-by: Frederic Pillon <[email protected]>

commit a93bdad
Author: Frederic Pillon <[email protected]>
Date:   Thu Jul 13 16:49:37 2023 +0200

    chore(editorconfig): do not apply change to patch files

    Signed-off-by: Frederic Pillon <[email protected]>

commit bc085c1
Author: Frederic Pillon <[email protected]>
Date:   Thu Jul 13 15:45:56 2023 +0200

    chore: bump library version to 1.2.5

    Signed-off-by: Frederic Pillon <[email protected]>

commit cf77ef0
Merge: df96671 a9bef0c
Author: Frederic Pillon <[email protected]>
Date:   Wed Apr 5 15:28:50 2023 +0200

    Merge pull request stm32duino#55 from fpistm/CubeWB_v1.16.0

    chore: update to STM32Cube_FW v1.16.0

commit a9bef0c
Author: Frederic Pillon <[email protected]>
Date:   Wed Apr 5 11:40:47 2023 +0200

    chore: add new field initalizer for SHCI_C2_Ble_Init_Cmd_Packet_t

    Signed-off-by: Frederic Pillon <[email protected]>

commit 1ec4563
Author: Frederic Pillon <[email protected]>
Date:   Wed Feb 8 16:50:46 2023 +0100

    fix: warning outside array bounds

    array subscript 'TL_CcEvt_t[0]' is partly outside array bounds

    Signed-off-by: Frederic Pillon <[email protected]>

commit 9b421c2
Author: Frederic Pillon <[email protected]>
Date:   Mon Dec 12 17:29:27 2022 +0100

    chore: add support for customize app_conf_default.h

    Signed-off-by: Frederic Pillon <[email protected]>

commit 7512953
Author: Frederic Pillon <[email protected]>
Date:   Mon Dec 12 17:17:48 2022 +0100

    fix: include a timeout when waiting for the cmd_resp

    Signed-off-by: Frederic Pillon <[email protected]>

commit d758a66
Author: Frederic Pillon <[email protected]>
Date:   Wed Apr 5 10:18:52 2023 +0200

    chore: adapt STM32Cube_FW sources

    Compare to previous patch, do the minimum changes required
    to ease further update.

    Signed-off-by: Frederic Pillon <[email protected]>

commit a903124
Author: Frederic Pillon <[email protected]>
Date:   Wed Apr 5 14:37:41 2023 +0200

    chore: update STM32Cube_FW from Cube version v1.16.0

    Signed-off-by: Frederic Pillon <[email protected]>

commit df96671
Author: Frederic Pillon <[email protected]>
Date:   Wed Apr 5 14:32:40 2023 +0200

    fix: regenerate STM32Cube_FW patches

    Prepare update to version 1.16.0

    Signed-off-by: Frederic Pillon <[email protected]>

commit bd27383
Author: Carlo Parata <[email protected]>
Date:   Thu Mar 30 16:15:07 2023 +0200

    Update library.properties

    Signed-off-by: Carlo Parata <[email protected]>

commit 1356fac
Merge: a5e0fed 902a770
Author: Carlo Parata <[email protected]>
Date:   Thu Mar 30 16:14:41 2023 +0200

    Merge pull request stm32duino#54 from elle-bi/main

    Add support for latest firmware in BLUENRG-M2SP chips.

commit 902a770
Author: Lorenzo Bini <[email protected]>
Date:   Thu Mar 30 12:03:37 2023 +0200

    Add support for latest firmware in BLUENRG-M2SP chips.
    This requires changing the SPI dummy package to 0x00 due to signaling over the MOSI pin

commit a5e0fed
Author: Frederic Pillon <[email protected]>
Date:   Wed Mar 29 10:05:59 2023 +0200

    examples: add P_NUCLEO_WB55_USB_DONGLE support

    Signed-off-by: Frederic Pillon <[email protected]>

commit 929b540
Author: Frederic Pillon <[email protected]>
Date:   Wed Feb 8 16:50:46 2023 +0100

    fix: warning outside array bounds

    array subscript 'TL_CcEvt_t[0]' is partly outside array bounds

    Signed-off-by: Frederic Pillon <[email protected]>

commit b0a1849
Author: Carlo Parata <[email protected]>
Date:   Fri Mar 17 09:57:50 2023 +0100

    Update library.properties

    Signed-off-by: Carlo Parata <[email protected]>

commit 02fd64f
Merge: 616f2fb 240590a
Author: Carlo Parata <[email protected]>
Date:   Wed Mar 15 09:17:32 2023 +0100

    Merge pull request stm32duino#52 from elle-bi/main

    Add API to get random address

commit 240590a
Author: Lorenzo Bini <[email protected]>
Date:   Tue Mar 14 17:19:12 2023 +0100

    Add API to get random address

commit 616f2fb
Author: Frederic Pillon <[email protected]>
Date:   Mon Jan 9 11:54:49 2023 +0100

    chore: bump library version

    Warning: not aligned with ArduinoBLE one

    Signed-off-by: Frederic Pillon <[email protected]>

commit b5a70eb
Author: Frederic Pillon <[email protected]>
Date:   Mon Jan 9 11:49:52 2023 +0100

    chore(examples): update circuit description

    Signed-off-by: Frederic Pillon <[email protected]>

commit ce6cc8f
Author: Frederic Pillon <[email protected]>
Date:   Mon Jan 9 11:31:16 2023 +0100

    fix: regenerate STM32Cube_FW patches

    due to STM32WB15xx support addition

    Signed-off-by: Frederic Pillon <[email protected]>

commit ceb1e62
Author: Frederic Pillon <[email protected]>
Date:   Mon Jan 9 11:12:06 2023 +0100

    fix(examples): aligned comments between all examples

    Signed-off-by: Frederic Pillon <[email protected]>

commit 3a11616
Author: Frederic Pillon <[email protected]>
Date:   Mon Jan 9 11:04:22 2023 +0100

    chore(examples): use USER_BTN if defined

    Signed-off-by: Frederic Pillon <[email protected]>

commit 40dd5bd
Author: Frederic Pillon <[email protected]>
Date:   Mon Jan 9 10:36:33 2023 +0100

    chore: update examples to support Nucleo WB15CC

    Will be available within stm32 core version higher than 2.4.0.

    Signed-off-by: Frederic Pillon <[email protected]>

commit 0fe8e71
Author: Frederic Pillon <[email protected]>
Date:   Mon Jan 9 10:33:24 2023 +0100

    chore: update app_conf default for STM32WB15xx

    Signed-off-by: Frederic Pillon <[email protected]>

commit b232c9a
Merge: 777b4a4 daa8475
Author: Frederic Pillon <[email protected]>
Date:   Thu Dec 15 11:48:47 2022 +0100

    Merge pull request stm32duino#48 from fpistm/updateWB

    chore: update STM32Cube_FW from Cube version v1.15.0

commit daa8475
Author: Frederic Pillon <[email protected]>
Date:   Thu Dec 15 11:01:08 2022 +0100

    ci(codespell): skip STM32Cube_FW directory

    Signed-off-by: Frederic Pillon <[email protected]>

commit 9b49cd6
Author: Frederic Pillon <[email protected]>
Date:   Thu Dec 15 10:52:49 2022 +0100

    fix: allows space at the end of line of markdown files

    Signed-off-by: Frederic Pillon <[email protected]>

commit 731440b
Author: Frederic Pillon <[email protected]>
Date:   Thu Dec 15 10:51:31 2022 +0100

    doc: reference STM32WBxx

    Signed-off-by: Frederic Pillon <[email protected]>

commit 23e7407
Author: Frederic Pillon <[email protected]>
Date:   Tue Dec 13 10:48:35 2022 +0100

    chore: add new field initalizer for SHCI_C2_Ble_Init_Cmd_Packet_t

    Signed-off-by: Frederic Pillon <[email protected]>

commit 45e49a6
Author: Frederic Pillon <[email protected]>
Date:   Tue Dec 13 10:16:08 2022 +0100

    chore: rename CFG_BLE_LSE_SOURCE to CFG_BLE_LS_SOURCE

    Signed-off-by: Frederic Pillon <[email protected]>

commit fb82a69
Author: Frederic Pillon <[email protected]>
Date:   Mon Dec 12 17:29:27 2022 +0100

    chore: add support for customize app_conf_default.h

    Signed-off-by: Frederic Pillon <[email protected]>

commit a3c689a
Author: Frederic Pillon <[email protected]>
Date:   Mon Dec 12 17:17:48 2022 +0100

    fix: include a timeout when waiting for the cmd_resp

    Signed-off-by: Frederic Pillon <[email protected]>

commit 70812b4
Author: Frederic Pillon <[email protected]>
Date:   Mon Dec 12 17:15:26 2022 +0100

    chore: clean up and adapt STM32Cube_FW sources for STM32duino

    Signed-off-by: Frederic Pillon <[email protected]>

commit 2d60f45
Author: Frederic Pillon <[email protected]>
Date:   Tue Dec 13 15:34:50 2022 +0100

    chore: update STM32Cube_FW from Cube version v1.15.0

    Signed-off-by: Frederic Pillon <[email protected]>

commit 777b4a4
Author: Frederic Pillon <[email protected]>
Date:   Tue Dec 13 15:20:56 2022 +0100

    fix: regenerate STM32Cube_FW patches

    Prepare update to version 1.15.0

    Signed-off-by: Frederic Pillon <[email protected]>

commit ec0d568
Author: Frederic Pillon <[email protected]>
Date:   Tue Dec 13 11:15:53 2022 +0100

    feat: adding gitattributes and editor config files

    Signed-off-by: Frederic Pillon <[email protected]>

commit 6ecff2b
Author: Frederic Pillon <[email protected]>
Date:   Fri Dec 9 17:28:57 2022 +0100

    fix: wrong release version

    Signed-off-by: Frederic Pillon <[email protected]>

commit 75ea6f4
Author: Frederic Pillon <[email protected]>
Date:   Thu Nov 24 10:01:39 2022 +0100

    ci: replace deprecated spellcheck by codespell

commit 1b61aa7
Merge: f8d947b 8f40c2f
Author: Frederic Pillon <[email protected]>
Date:   Mon Nov 21 16:19:25 2022 +0100

    Merge pull request stm32duino#47 from ABOSTM/WB_FIX_HCI_ONLY_FW_COMPATIBILITY

    fix: HCI only Firmware not supporting ACI_GAP_INIT ACI_GATT_INIT

commit 8f40c2f
Author: Alexandre Bourdiol <[email protected]>
Date:   Tue Oct 25 18:28:48 2022 +0200

    fix: CI spell check

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 1c8974d
Author: Alexandre Bourdiol <[email protected]>
Date:   Mon Oct 24 11:35:21 2022 +0200

    fix: HCI only Firmware not supporting ACI_GAP_INIT ACI_GATT_INIT

    On STM32WB, Cube FW version 1.14.1,
    messages ACI_GATT_INIT and ACI_GAP_INIT
    are not available on HCI only BLE firmware
    (stm32wb5x_BLE_HCILayer_fw.bin)
    This imply to move Random Address to host instead of relying on controller

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit f8d947b
Merge: 543f6a5 93af438
Author: Carlo Parata <[email protected]>
Date:   Mon Oct 17 10:45:30 2022 +0200

    Merge pull request stm32duino#45 from grobx/bluenrg-lp-pr

    BlueNRG-LP Support

commit 543f6a5
Merge: 54af742 f4c2607
Author: Frederic Pillon <[email protected]>
Date:   Tue Oct 11 17:15:44 2022 +0200

    Merge pull request stm32duino#46 from ABOSTM/UPDATE_BLE_1.14.1

    Update BLE to Cube version 1.14.1

commit f4c2607
Author: Alexandre Bourdiol <[email protected]>
Date:   Tue Aug 30 13:32:30 2022 +0200

    fix: implement BLE debug based on core_debug()

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit f77db6b
Author: Alexandre Bourdiol <[email protected]>
Date:   Fri Sep 2 14:59:07 2022 +0200

    Fix: Move EvtPool array from MB_MEM2 to MB_MEM1

    MB_MEM1 and MB_MEM2 ae now respectively in SRAM2a and SRAM2b
    SRAM2a being too small to put all shared memory variables
    Warning depends on split made on core:
    variants/STM32WBxx/WB55R(C-E-G)V/ldscript.ld

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 3f23425
Author: Alexandre Bourdiol <[email protected]>
Date:   Wed Aug 31 17:18:16 2022 +0200

    Fix: Remove compilation warning about uninitialized struct field

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 4eb33a1
Author: Alexandre Bourdiol <[email protected]>
Date:   Tue Aug 30 13:31:31 2022 +0200

    Added support for custom app_conf.h

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 882adda
Author: Alexandre Bourdiol <[email protected]>
Date:   Tue Aug 30 13:19:36 2022 +0200

    fix: include a timeout when waiting for the cmd_resp

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 4a9f4ae
Author: Alexandre Bourdiol <[email protected]>
Date:   Tue Aug 30 11:28:41 2022 +0200

    chore: clean up and adapt STM32Cube_FW sources for STM32duino

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 2cc9f0f
Author: Alexandre Bourdiol <[email protected]>
Date:   Tue Aug 30 10:56:46 2022 +0200

    Update STM32Cube_FW from Cube version 1.14.1

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 69a6b5f
Author: Alexandre Bourdiol <[email protected]>
Date:   Tue Aug 30 13:50:51 2022 +0200

    fix: Regenrate BLE patches prepare Update STM32Cube_FW

    Prepare update to version 1.14.0

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 93af438
Author: Giuseppe Roberti <[email protected]>
Date:   Tue Aug 30 14:51:20 2022 +0200

    Enable STEVAL-MKBOXPRO support in examples

commit 831e996
Author: Giuseppe Roberti <[email protected]>
Date:   Tue Aug 9 16:32:20 2022 +0200

    LP only differ in cmd, not procedure

commit 9cf284f
Author: Giuseppe Roberti <[email protected]>
Date:   Tue Aug 9 13:34:06 2022 +0200

    Ugly fix delay

commit 6e95133
Author: Giuseppe Roberti <[email protected]>
Date:   Tue Aug 9 10:17:09 2022 +0200

    Support BlueNRG-LP

commit 54af742
Merge: 061ec8e 381c3ca
Author: Carlo Parata <[email protected]>
Date:   Wed Aug 31 08:33:07 2022 +0200

    Merge pull request stm32duino#44 from grobx/main

    Fix hard fault when str is NULL

commit 381c3ca
Author: Giuseppe Roberti <[email protected]>
Date:   Tue Aug 30 11:55:17 2022 +0200

    Fix hard fault when str is NULL

commit 061ec8e
Author: Alexandre Bourdiol <[email protected]>
Date:   Fri Apr 8 15:01:59 2022 +0200

    Update STM32Cube_FW from Cube version v1.13.3

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 1f3c876
Merge: 331c39a abeaf9a
Author: Frederic Pillon <[email protected]>
Date:   Fri Dec 10 10:02:28 2021 +0100

    Merge pull request stm32duino#39 from ABOSTM/BLE_PATCHES

    Update BLE library with STM32WB Cube version v1.13.0

commit abeaf9a
Author: Alexandre Bourdiol <[email protected]>
Date:   Tue Dec 7 14:27:27 2021 +0100

    Stub OutputDbgTrace() function

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 55aa462
Author: Alexandre Bourdiol <[email protected]>
Date:   Mon Dec 6 18:59:38 2021 +0100

    Added support for custom app_conf.h (stm32duino#35)

commit 0d821e8
Author: Alexandre Bourdiol <[email protected]>
Date:   Mon Dec 6 11:18:02 2021 +0100

    fix: include a timeout when waiting for the cmd_resp

    Signed-off-by: Francois Ramu <[email protected]>
    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 6eb25bc
Author: Alexandre Bourdiol <[email protected]>
Date:   Mon Dec 6 11:08:32 2021 +0100

    chore: clean up and adapt STM32Cube_FW sources for STM32duino

    Signed-off-by: Frederic Pillon <[email protected]>
    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit ab9e2f9
Author: Alexandre Bourdiol <[email protected]>
Date:   Mon Dec 6 19:17:44 2021 +0100

    Update STM32Cube_FW from Cube version v1.13.0

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 8ce1025
Author: Alexandre Bourdiol <[email protected]>
Date:   Thu Dec 2 10:23:30 2021 +0100

    Add patch files to be applied on stm32wb Cube update

    Patches correspond to somes commits of PR stm32duino#38

    Signed-off-by: Alexandre Bourdiol <[email protected]>

commit 331c39a
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 8 11:14:45 2021 +0100

    Update spell-check.yml

commit a36ed33
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 8 11:03:29 2021 +0100

    Update spell-check.yml

commit e1a92dd
Merge: 095fe18 14c0f73
Author: Frederic Pillon <[email protected]>
Date:   Mon Dec 6 17:45:05 2021 +0100

    Merge pull request stm32duino#38

    Rework the STM32CubeWB FW files to ease update

commit 14c0f73
Author: KMeldgaard <[email protected]>
Date:   Mon Nov 15 14:54:07 2021 +0100

    Added support for custom app_conf.h (stm32duino#35)

commit 09680e7
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 1 18:42:57 2021 +0100

    fix: include a timeout when waiting for the cmd_resp

    Signed-off-by: Francois Ramu <[email protected]>

commit 108f46f
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 1 18:38:39 2021 +0100

    fix: [-Waddress-of-packed-member] warning

    Signed-off-by: Frederic Pillon <[email protected]>

commit 4d9fd31
Author: Francois Ramu <[email protected]>
Date:   Thu Nov 12 13:21:31 2020 +0100

    fix: missing IPCC enable for C2 in several examples from stm32CubeWB

    This fix is coming from
    STMicroelectronics/STM32CubeWB#19

    Signed-off-by: Francois Ramu <[email protected]>

commit ac3469e
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 1 15:13:05 2021 +0100

    chore: clean up and adapt STM32Cube_FW sources for STM32duino

    Signed-off-by: Frederic Pillon <[email protected]>

commit 370b06d
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 1 11:15:00 2021 +0100

    chore: include STM32Cube_FW to support the BLE of the stm32wb55

    Orignal file from the v1.8.0:
    https://github.com/STMicroelectronics/STM32CubeWB/releases/tag/v1.8.0

    Signed-off-by: Frederic Pillon <[email protected]>

commit ce7cb45
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 1 10:38:58 2021 +0100

    Revert "Include the STM32Cube_FW to support the BLE of the stm32wb55"

    This reverts commit 3019930.

commit 9895272
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 1 10:38:36 2021 +0100

    Revert "This BLE RF configuration has many unused define values"

    This reverts commit 732ffed.

commit 643daea
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 1 10:29:17 2021 +0100

    Revert "Missing IPCC enable for C2 in several examples from stm32CubeWB"

    This reverts commit 163bd85.

commit a526067
Author: Francois Ramu <[email protected]>
Date:   Thu Nov 19 19:07:13 2020 +0100

    Revert "Fix [-Waddress-of-packed-member] warning"

commit b64df41
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 1 10:22:00 2021 +0100

    Revert "Include a timeout when waiting for the cmd_resp"

    This reverts commit 3a063df.

commit 6a6c550
Author: Frederic Pillon <[email protected]>
Date:   Wed Dec 1 10:21:53 2021 +0100

    Revert "Added support for custom app_conf.h (stm32duino#35)"

    This reverts commit 095fe18.

commit 095fe18
Author: KMeldgaard <[email protected]>
Date:   Mon Nov 15 14:54:07 2021 +0100

    Added support for custom app_conf.h (stm32duino#35)

commit 1cf1da0
Author: Frederic Pillon <[email protected]>
Date:   Tue Oct 5 16:04:46 2021 +0200

    ci: change to main branch

    Signed-off-by: Frederic Pillon <[email protected]>

commit 4350cf0
Merge: ee4927f b22266f
Author: Frederic Pillon <[email protected]>
Date:   Thu Jul 8 15:21:22 2021 +0200

    Merge tag '1.2.1'

    Signed-off-by: Frederic Pillon <[email protected]>

commit ee4927f
Merge: 23053fb faffc11
Author: Frederic Pillon <[email protected]>
Date:   Thu Jul 8 14:44:31 2021 +0200

    Merge pull request stm32duino#32 from fpistm/STM32WB5MM_DK

    examples: add STM32WB5MM-DK support

commit faffc11
Author: Frederic Pillon <[email protected]>
Date:   Thu Jul 8 14:33:34 2021 +0200

    examples: add STM32WB5MM-DK support

    Signed-off-by: Frederic Pillon <[email protected]>

commit ac6431e
Author: Frederic Pillon <[email protected]>
Date:   Thu Jul 8 14:31:58 2021 +0200

    fix: remove specific include

    Correct CMSIS devide header already included by the core.

    Signed-off-by: Frederic Pillon <[email protected]>

commit 23053fb
Author: Frederic Pillon <[email protected]>
Date:   Wed May 5 15:17:35 2021 +0200

    Update library.properties

commit 9b7107b
Merge: b7a5d16 4031a6a
Author: Frederic Pillon <[email protected]>
Date:   Tue May 4 17:33:55 2021 +0200

    Merge pull request stm32duino#29 from fpistm/ci

    Update CI with new maintainer name

    Workflow also synced with upstream repo.

commit 4031a6a
Author: Frederic Pillon <[email protected]>
Date:   Tue May 4 17:20:49 2021 +0200

    fix: ci: update with new maintainer name

    Signed-off-by: Frederic Pillon <[email protected]>

commit e3bdb38
Author: Frederic Pillon <[email protected]>
Date:   Tue May 4 16:06:31 2021 +0200

    Use consistent indent size in Compile Examples workflow

    The initial single space indent made the workflow difficult to edit and harmed readability.

commit 4342fe8
Author: per1234 <[email protected]>
Date:   Sat Sep 26 16:18:05 2020 -0700

    Use consistent formatting style in Compile Examples CI action

    The previous inconsistent markup style, although perfectly valid, made the workflow harder to understand.

commit 04bcd68
Author: per1234 <[email protected]>
Date:   Sat Sep 26 16:15:51 2020 -0700

    Update name of action used to compile examples in CI workflow

    The action has been moved to a dedicated repository, where all future development work will happen.

commit f03924f
Author: per1234 <[email protected]>
Date:   Sat Sep 26 16:13:57 2020 -0700

    Update version of actions/checkout action used in Compile Examples CI workflow

    The action now has a default fetch-depth value of 1, so there is no need to specify this input.

commit b7a5d16
Merge: ee32ef2 4c149a2
Author: Frederic Pillon <[email protected]>
Date:   Tue May 4 15:27:40 2021 +0200

    Merge tag '1.2.0'

    Signed-off-by: Frederic Pillon <[email protected]>

commit ee32ef2
Merge: 5512049 fc7c4c6
Author: Frederic Pillon <[email protected]>
Date:   Tue Mar 30 17:16:19 2021 +0200

    Merge pull request stm32duino#21 from fpistm/B_L475E_IOT01A

    Use B_L475E_IOT01A official name and fix P_NUCLEO_WB55RG

commit fc7c4c6
Author: Frederic Pillon <[email protected]>
Date:   Tue Mar 30 16:47:42 2021 +0200

    Fix P_NUCLEO_WB55RG official name

    Signed-off-by: Frederic Pillon <[email protected]>

commit becff9e
Author: Frederic Pillon <[email protected]>
Date:   Thu Jan 14 14:24:16 2021 +0100

    Use B_L475E_IOT01A official name

    Since STM32 core version 2.0.0, the board name has been updated
    from DISCO_L475VG_IOT to B_L475E_IOT01A.

    Signed-off-by: Frederic Pillon <[email protected]>

commit 5512049
Merge: 9297570 15e8789
Author: Carlo Parata <[email protected]>
Date:   Thu Feb 11 15:07:20 2021 +0100

    Merge pull request stm32duino#28 from FRASTM/mbox_write

    mbox_write returns the nb of bytes actually written

commit 15e8789
Author: Francois Ramu <[email protected]>
Date:   Thu Feb 11 10:16:50 2021 +0100

    mbox_write returns the nb of bytes actually written

    Check the value which is returned by the mbox_write function,
    if it differs from the len of data to be sent, this is an error

    Signed-off-by: Francois Ramu <[email protected]>

commit 9297570
Merge: ed10763 ec6547b
Author: Carlo Parata <[email protected]>
Date:   Wed Feb 10 15:56:34 2021 +0100

    Merge pull request stm32duino#27 from cparata/master

    Add static random address support for all ST BLE chips

commit ec6547b
Author: Carlo Parata <[email protected]>
Date:   Tue Feb 9 16:34:29 2021 +0100

    Fix button issue on WB55

commit c1c7d1a
Author: Carlo Parata <[email protected]>
Date:   Tue Feb 9 15:35:13 2021 +0100

    Add the possibility to choose the ownAddressType in the Arduino stack

commit d1535a0
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 8 16:42:53 2021 +0100

    Fix typo

commit 9ec4d79
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 8 16:25:43 2021 +0100

    Fix code spelling issues

commit 439eca0
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 8 16:11:26 2021 +0100

    Add static random address support for all ST BLE chips

commit ed10763
Merge: 39406aa afeccd3
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 8 15:49:43 2021 +0100

    Merge pull request stm32duino#25 from FRASTM/wb55_sem

    Activate default clocks on the stm32wb

commit 39406aa
Merge: 5ceaf45 870c91e
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 8 15:49:01 2021 +0100

    Merge pull request stm32duino#26 from FRASTM/wb55_otp

    Set a bd address from OTP for the BLE device stm32wb55

commit 870c91e
Author: Francois Ramu <[email protected]>
Date:   Thu Feb 4 10:38:12 2021 +0100

    Set a new bd address for the BLE device

    In case the bd address cannot be computed from the flash
    then the otp is read to provide a valid one in a OTP_BT_t

    Signed-off-by: Francois Ramu <[email protected]>

commit afeccd3
Author: Francois Ramu <[email protected]>
Date:   Tue Feb 2 12:36:53 2021 +0100

    Activate default clocks on the STM32WB

    Signed-off-by: Francois Ramu <[email protected]>

commit 5ceaf45
Merge: 4867274 3a063df
Author: Carlo Parata <[email protected]>
Date:   Wed Feb 3 17:19:16 2021 +0100

    Merge pull request stm32duino#23 from FRASTM/wb55_ble

    Timeout returned when configuring BLE stack for SharedMem transport

commit 3a063df
Author: Francois Ramu <[email protected]>
Date:   Thu Jan 28 16:40:56 2021 +0100

    Include a timeout when waiting for the cmd_resp

    Signed-off-by: Francois Ramu <[email protected]>

commit 4867274
Merge: 60d2609 fc7162e
Author: Carlo Parata <[email protected]>
Date:   Tue Feb 2 13:26:01 2021 +0100

    Merge pull request stm32duino#24 from cparata/master

    Sync with official ArduinoBLE repo

commit fc7162e
Merge: 60d2609 be365c9
Author: Carlo Parata <[email protected]>
Date:   Fri Jan 29 15:41:24 2021 +0100

    Synch with ArduinoBLE official repo

commit 60d2609
Merge: 3813996 8f0e116
Author: Carlo Parata <[email protected]>
Date:   Tue Dec 1 09:54:14 2020 +0100

    Merge pull request stm32duino#17 from FRASTM/wb55_BLE

    BLE on the stm32wb55

commit 8f0e116
Author: Francois Ramu <[email protected]>
Date:   Fri Sep 25 13:39:19 2020 +0200

    Modify the examples to run on the nucleo_wb55rg board

    Signed-off-by: Francois Ramu <[email protected]>

commit 0660a94
Author: Francois Ramu <[email protected]>
Date:   Thu Nov 19 19:07:13 2020 +0100

    Fix [-Waddress-of-packed-member] warning

    Signed-off-by: Francois Ramu <[email protected]>

commit 19df1cb
Author: Francois Ramu <[email protected]>
Date:   Thu Nov 5 18:41:53 2020 +0100

    Add shared memory transport layer for the stm32wb55
    to use connection and services the BLE RF through IPM SharedMem

    The Rx data are stored in a fifo to manage connection, and ACL packets
    with context section to protect index when receiving data.
    The BLE init set the device address and power settings just after the HCI_RESET command sent
    The LSE clock is used for the RF and WakeUp capability by the variant.
    There is no BLEChip enum as only one chip at this time.
    Debug is activated with CONFIG_DEBUG enabled

    Signed-off-by: Francois Ramu <[email protected]>

commit 163bd85
Author: Francois Ramu <[email protected]>
Date:   Thu Nov 12 13:21:31 2020 +0100

    Missing IPCC enable for C2 in several examples from stm32CubeWB
    This fix is coming from
    STMicroelectronics/STM32CubeWB#19

    Signed-off-by: Francois Ramu <[email protected]>

commit 732ffed
Author: Francois Ramu <[email protected]>
Date:   Thu Nov 12 12:25:50 2020 +0100

    This BLE RF configuration has many unused define values
    which are removed there

    Signed-off-by: Francois Ramu <[email protected]>

commit 3019930
Author: Francois Ramu <[email protected]>
Date:   Tue Oct 13 17:03:40 2020 +0200

    Include the STM32Cube_FW to support the BLE of the stm32wb55
    Only in case STM32WBxx device defined

    Signed-off-by: Francois Ramu <[email protected]>

commit f7dbf18
Author: Francois Ramu <[email protected]>
Date:   Wed Nov 4 16:44:37 2020 +0100

    Support of the shared memory transport layer for the stm32wb55
    with STM32WB built-in chip (STM32WB_RF)
    It also Allows HCI SPI Transport with STM32WBxx

    Signed-off-by: Francois Ramu <[email protected]>

commit 3813996
Merge: d952a0f e6d0635
Author: Carlo Parata <[email protected]>
Date:   Wed Sep 30 16:55:40 2020 +0200

    Merge pull request stm32duino#19 from cparata/master

    Update comment and restore B_L4S5I_IOT01A support

commit e6d0635
Author: Carlo Parata <[email protected]>
Date:   Wed Sep 30 16:48:09 2020 +0200

    Update comment and restore B_L4S5I_IOT01A support

commit d952a0f
Merge: 61138fc 0d936a4
Author: Carlo Parata <[email protected]>
Date:   Wed Sep 30 15:56:53 2020 +0200

    Merge pull request stm32duino#18 from cparata/master

    Add support to X-NUCLEO-IDB05A2

commit 0d936a4
Author: Carlo Parata <[email protected]>
Date:   Wed Sep 30 15:37:58 2020 +0200

    Add support to X-NUCLEO-IDB05A2

commit 61138fc
Merge: e7e1bf7 14fd996
Author: Carlo Parata <[email protected]>
Date:   Thu Sep 24 15:32:23 2020 +0200

    Merge pull request stm32duino#16 from cparata/master

    Align STM32duinoBLE to current ArduinoBLE master

commit 14fd996
Author: Carlo Parata <[email protected]>
Date:   Thu Sep 24 15:20:31 2020 +0200

    Fix compilation warning

commit ec83c8a
Merge: 73a4e1a 524b3a6
Author: Carlo Parata <[email protected]>
Date:   Thu Sep 24 14:33:36 2020 +0200

    Align to ArduinoBLE master

commit e7e1bf7
Author: Francois Ramu <[email protected]>
Date:   Mon Sep 7 16:16:46 2020 +0200

    add stm32L4+ discovery kit for BLE access of all examples

    B_L4S5I_IOT01A is using same pins for Bluetooth and SPI3
    as the discovery kit B-L475E-IOT01A1

    Signed-off-by: Francois Ramu <[email protected]>

commit 3559592
Author: Frederic Pillon <[email protected]>
Date:   Thu Sep 10 10:18:59 2020 +0200

    Fix typo

commit 93c6887
Author: Frederic Pillon <[email protected]>
Date:   Thu Sep 10 10:18:19 2020 +0200

    Fix Typo

commit be2ed7e
Merge: 3df2192 73a4e1a
Author: Carlo Parata <[email protected]>
Date:   Wed Mar 25 19:18:34 2020 +0100

    Merge pull request stm32duino#14 from cparata/master

    Update README

commit 73a4e1a
Author: Carlo Parata <[email protected]>
Date:   Wed Mar 25 19:17:06 2020 +0100

    Update README

commit 3df2192
Merge: dbc9cd1 3499bfa
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 12:36:58 2020 +0100

    Merge pull request stm32duino#13 from cparata/master

    Update CHANGELOG

commit 3499bfa
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 12:35:36 2020 +0100

    Update CHANGELOG

commit dbc9cd1
Merge: 04a895f 742e409
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 12:25:17 2020 +0100

    Merge pull request stm32duino#12 from cparata/master

    Replace ArduinoBLE.h with STM32duinoBLE.h and create a new release fo…

commit 742e409
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 12:23:56 2020 +0100

    Replace ArduinoBLE.h with STM32duinoBLE.h and create a new release for publication

commit 04a895f
Merge: 495b941 bd1b0e0
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 11:40:04 2020 +0100

    Merge pull request stm32duino#11 from cparata/master

    Improve STM32duinoBLE robustness and flexibility

commit bd1b0e0
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 11:34:49 2020 +0100

    Update keywords.txt with new classes, methods and constants

commit 5d789c6
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 11:11:51 2020 +0100

    Improve check when BLE chip is not supported

commit e53282b
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:41:21 2020 +0100

    Update examples/Peripheral/LED/LED.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit d4bb5d8
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:41:08 2020 +0100

    Update examples/Peripheral/LED/LED.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit 11bb949
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:40:55 2020 +0100

    Update examples/Peripheral/CallbackLED/CallbackLED.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit da2c4fd
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:40:44 2020 +0100

    Update examples/Peripheral/CallbackLED/CallbackLED.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit b95942f
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:40:33 2020 +0100

    Update examples/Peripheral/ButtonLED/ButtonLED.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit fafde93
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:40:23 2020 +0100

    Update examples/Peripheral/ButtonLED/ButtonLED.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit 18e0ca1
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:40:13 2020 +0100

    Update examples/Central/SensorTagButton/SensorTagButton.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit aa6e1b3
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:40:00 2020 +0100

    Update examples/Central/SensorTagButton/SensorTagButton.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit b598a3f
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:39:48 2020 +0100

    Update examples/Central/ScanCallback/ScanCallback.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit c9f4239
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:39:37 2020 +0100

    Update examples/Central/ScanCallback/ScanCallback.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit f7d45fa
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:39:25 2020 +0100

    Update examples/Central/Scan/Scan.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit 775a60a
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:39:13 2020 +0100

    Update examples/Central/Scan/Scan.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit 9f46797
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:39:06 2020 +0100

    Update examples/Central/LedControl/LedControl.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit 81ff00b
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:38:57 2020 +0100

    Update examples/Central/LedControl/LedControl.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit 19ce615
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:38:49 2020 +0100

    Update examples/Central/PeripheralExplorer/PeripheralExplorer.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit ab1df57
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:38:38 2020 +0100

    Update examples/Central/PeripheralExplorer/PeripheralExplorer.ino

    Co-Authored-By: Frederic Pillon <[email protected]>

commit 94a834a
Merge: c4f359a 7e7cf88
Author: Carlo Parata <[email protected]>
Date:   Mon Feb 17 10:25:33 2020 +0100

    Merge pull request #1 from fpistm/pr-11

    STM32duinoBLE enhancement

commit 7e7cf88
Author: Frederic Pillon <[email protected]>
Date:   Mon Feb 17 10:08:13 2020 +0100

    Fix workflow to build ST targets

    Signed-off-by: Frederic Pillon <[email protected]>

commit 2f22ce9
Author: Frederic Pillon <[email protected]>
Date:   Tue Nov 19 12:07:36 2019 +0100

    Replace boolean with standard bool

    arduino/Arduino#4673

    Signed-off-by: Frederic Pillon <[email protected]>

commit 02ff3a6
Author: Frederic Pillon <[email protected]>
Date:   Mon Feb 17 09:00:30 2020 +0100

    SPISettings managements

    Signed-off-by: Frederic Pillon <[email protected]>

commit c4f359a
Author: Carlo Parata <[email protected]>
Date:   Fri Feb 7 11:20:49 2020 +0100

    Improve STM32duinoBLE robustness and flexibility

commit 495b941
Merge: 4734253 83671f4
Author: Carlo Parata <[email protected]>
Date:   Tue Dec 3 13:43:51 2019 +0100

    Merge pull request stm32duino#10 from cparata/master

    Sync with ArduinoBLE

commit 83671f4
Merge: 41cf4bc 8dc4290
Author: Carlo Parata <[email protected]>
Date:   Tue Dec 3 11:34:54 2019 +0100

    Merge remote-tracking branch 'upstream/master'

commit 4734253
Merge: 5d4475a 41cf4bc
Author: Carlo Parata <[email protected]>
Date:   Fri Nov 15 18:05:18 2019 +0100

    Merge pull request stm32duino#9 from cparata/master

    Align to ArduinoBLE 1.1.2

commit 41cf4bc
Merge: fa813f0 ac85dae
Author: Carlo Parata <[email protected]>
Date:   Fri Nov 15 18:03:05 2019 +0100

    Align to ArduinoBLE 1.1.2

commit 5d4475a
Merge: 33a8c3b fa813f0
Author: Carlo Parata <[email protected]>
Date:   Tue Nov 12 14:04:30 2019 +0100

    Merge pull request stm32duino#8 from cparata/master

    Replace typo STBTLE with SPBTLE

commit fa813f0
Author: Carlo Parata <[email protected]>
Date:   Tue Nov 12 14:00:26 2019 +0100

    Replace typo STBTLE with SPBTLE

commit 33a8c3b
Merge: b530dec 0c59e94
Author: Carlo Parata <[email protected]>
Date:   Thu Oct 10 12:32:24 2019 +0200

    Merge pull request stm32duino#6 from cparata/master

    Sync with ArduinoBLE library

commit 0c59e94
Merge: e37e3aa 226ced5
Author: Carlo Parata <[email protected]>
Date:   Thu Oct 10 12:17:25 2019 +0200

    Solve conflicts

commit b530dec
Merge: d54c075 e37e3aa
Author: Carlo Parata <[email protected]>
Date:   Wed Sep 25 14:53:50 2019 +0200

    Merge pull request stm32duino#5 from cparata/master

    Update README and Library properties files

commit e37e3aa
Author: Carlo Parata <[email protected]>
Date:   Wed Sep 25 14:51:27 2019 +0200

    Update README and Library properties

commit 1b0d04e
Merge: d556640 d6fba6a
Author: Carlo Parata <[email protected]>
Date:   Fri Sep 20 15:48:48 2019 +0200

    Merge remote-tracking branch 'upstream/master'

commit d54c075
Merge: 7db8cef d556640
Author: Carlo Parata <[email protected]>
Date:   Fri Sep 20 11:46:16 2019 +0200

    Merge pull request stm32duino#4 from cparata/master

    Fix issue on Disconnection event

commit d556640
Author: Carlo Parata <[email protected]>
Date:   Fri Sep 20 11:44:53 2019 +0200

    Fix issue on Disconnection event

commit 7db8cef
Merge: 5e44386 137c830
Author: Carlo Parata <[email protected]>
Date:   Fri Sep 20 10:39:28 2019 +0200

    Merge pull request stm32duino#3 from cparata/master

    Add support to STBTLE-RF and STBTLE-1S modules

commit 137c830
Author: Carlo Parata <[email protected]>
Date:   Fri Sep 20 10:29:45 2019 +0200

    Update README and library properties for STM32duinoBLE

commit 3474eab
Merge: 8527443 5e44386
Author: Carlo Parata <[email protected]>
Date:   Fri Sep 20 09:40:30 2019 +0200

    Merge remote-tracking branch 'upstream/master'

commit 8527443
Author: Carlo Parata <[email protected]>
Date:   Thu Sep 19 10:33:53 2019 +0200

    Add support to STBTLE-RF and STBTLE-1S